Synthesized, Optical Properties and Biological Activity of Copper Oxide Nanoparticles Prepared by Various Parameters of Laser Ablation Technique I5n DDW
Keywords:
Laser ablation, Copper oxide NPs, Optical characteristics, Morphology of CuO, Antibacterial activity.Abstract
In this paper, copper oxide nanoparticles were prepared through Q-switched Nd:YAG laser ablation. The ablation process was carried out on a copper pellet that was submerged in double-distilled water. The ablation was performed at two different energy levels, specifically 200 mJ and 400 mJ, and with varying numbers of pulses ranging from 100 to 500 by step 100. The morphological and optical characteristics of nanoparticles were ascertained through the utilization of a UV-Vis spectrophotometer, transmission electron microscopy (TEM) and atomic force microscopy (AFM). As the laser pulses were increased, surface plasmon resonance peaks were observed in the absorption spectra at 217 nm. Additionally, there was a slight decrease in the optical band gap. The results of the UV-vis and TEM analyses indicated the presence of CuO nanoparticles that were almost spherical in shape. The average diameter of these nanoparticles was found to be about 46 nm and 52 nm when the energies used were 200 mJ and 400 mJ, respectively. It is noteworthy that the particle size of CuONPs was increased by increasing the laser energy of ablation .Moreover, the findings of our investigation indicate that the inhibitory effect against both Bacillus cereus and Pseudomonas aeruginosa, respectively, was enhanced by CuONPs at 200 mJ in comparison with 400 mJ with the same number of pulses.
Downloads
References
Al-Douri Y, Al-Samarai RA, AbdulateefSA, Odeh AA, Badi N, Voon CH. 2019.
Nanosecond pulsed laser ablation to synthesize GaO colloidal nanoparticles:
optical and structural properties.Optik (Stuttg).;178:337-42.
Allaker, R.P., 2010. The use of nanoparticles to control oral biofilm
formation. Journal of dental research, 89(11), pp.l175-1186.
Arakelyan, S. M., Veiko, V. P., Kutrovskaya, S. V., et al.,2016. Reliable
and well-controlled synthesis of noble metal nanoparticles by
continuous wave laser ablation in different liquids for deposition of
thin films with variable opticalproperties . J Nanopart Res. 18, 155.
https://doi.org/10.1007/s11051-016-3468-0
Azam, A., Ahmed, A.S., Oves, M., Khan, M.S. and Memic, A., 2012.
Size-dependent antimicrobial properties of CuO nanoparticles
against Gram-positive and-negative bacterial strains. International
journal of nanomedicine, pp.3527-3535
Azadi, H., Aghdam, H.D., Malekfar, R. and Bellah, S.M., 2019. Effects of
energy and hydrogen peroxide concentration on structural and
optical properties of CuO nanosheets prepared by pulsed laser
ablation. Results in Physics, 15, p.102610
Bhardwaj, A.K., Kumar, V., Pandey, V., Naraian, R. and Gopal, R., 2019.
Bacterial killing efficacy of synthesized rod shaped cuprous oxide
nanoparticles usinglaser ablation technique.8N Applied Sciences,1,pp.l-8.
Carlin, F., M. Fricker, A. Pielaat, S. Heisterkamp, R. Shaheen, M. S.
Salonen, B. Svensson, C. Nguyen-The, and M. EhlingSchulz. 2006.
Emetic toxin-producing strains of Bacillus cereus show distinct
characteristics within the Bacillus cereus group. Int. J. Food
Microbiol. 109:132-138
Dufrenne, J., A. Tatini, and S. Notermans. 1994.Stability of spores of Bacillus
cereus stored on silicagel. Int. J. Food Microbiol. 23:111-116.
El Zowalaty M.E, Al Thani A.A, Webster TJ, El Zowalaty A.E,
Schweizer H.P, Nasrallah G.K, Marei H.E, Ashour H.M. . 2015.
Pseudomonas aeruginosa: arsenal of resistance mechanisms,
decades of changing resistance profiles, and future antimicrobial
therapies. Future Microbiol.10(10):1683-706.
http://dx.doi.org/10.2217/fmb.15.48
Ganeev RA, Baba M, Ryasnyansky AI, Suzuki M, Kuroda H. 2004.
Characterization of optical and nonlinear optical properties of silver
nanoparticles prepared by laser ablation in various liquids. Opt
Commun;240(4-6):437-48.
Giorgetti E, Muniz Miranda M, Caporali S, Canton P, Marsili P, Vergari
C, et al. 2015. TiO2 nanoparticles obtained by laser ablation in
water: influence of pulse energy and duration on the crystalline
phase. J Alloy Compd;643(Sl):S75-9.
Gondal, M.A., Qahtan, T.F., Dastageer, M.A., Saleh, T.A., Maganda,
Y.W. and Anjum, D.H., 2013. Effects of oxidizing medium on the
composition, morphology and optical properties of copper oxide
nanoparticles produced by pulsed laser ablation. Applied surface
science, 286, pp.149-155.
Halbus, A.F., Horozov, T.S. and Paunov, V.N., 2019. Strongly enhanced
antibacterial action of copper oxide nanoparticles with boronic acid
surface functionality. ACS applied materials & interfaces,11(13),
pp.12232-12243.
Ismail, R.A., Sulaiman, G.M., Mohsin, M.H. and Saadoon, A.H., 2018.
Preparation of silver iodide nanoparticles using laser ablation in
liquid for antibacterial applications. IET nanobiotechnology, 12(6),
pp.781-786.
Kareem, M.M., 2021. The Effect of Laser Shots on Morphological and
Optical Properties of Copper Oxide NPs Prepared by Nd-Yag Laser
of 1064 nm Wavelengths in Distilled Water. Passer Journal of Basic
and Applied Sciences,3(2), pp.200-206.
Mafime, F., Kohno, J.Y., Takeda, Y., Kondow, T. and Sawabe, H., 2001.
Formation of gold nanoparticles by laser ablation in aqueous
solution of surfactant. The Journal of Physical Chemistry B, 105(22),
pp.5114-5120.
Menazea, A. A., Elashmawi, I. S., El-kader, F. A., Hakeem, N. A.,
Nanosecond pulsed laser ablation in liquids as new route
for preparing polyvinyl carbazole/silver nanoparticles
composite: spectroscopic and thermal studies. J Inorg
Organomet Polym .28, 2564-2571.
https://doi.org/10.1007/sl0904-018-089Q-z.Monteiro, D.R., Gorup, L.F., Takamiya, A.S., Ruvollo-Filho, A.C., de
Camargo, E.R. and Barbosa, D.B., 2009. The growing importance of
materials that prevent microbial adhesion: antimicrobial effect of
medical devices containing silver. International journal of
antimicrobial agents, 34(2), pp.103-110.
Nie, S., Emory,S. R.,1997. Probing Single Molecules and Single
Nanoparticles by Surface-Enhanced Raman Scattering .Science. 275,
-1106. DOI: 10.1126/science.275.5303.1102
Niu, K.Y., Yang, J., Kulinich, S.A., Sun, J., Li, H. and Du, X.W., 2010.
Morphology control of nanostructures via surface reaction of metal
nanodroplets. Journal of the American Chemical Society, 132(28),
pp.9814-9819.
Pena C, Suarez C, Tubau F, Dominguez A, Sora M, Pujol M, Gudiol F,
Ariza J. 2009. Carbapenem-resistant Pseudomonas aeruginosa:
factors influencing multidrug-resistant acquisition in non-critically
ill patients. Eur J Clin Microbiol Infect Dis.28(5):519-22.
http://dx.doi.org/10.1007/s10096-008-0645-9
Patra N, Akash K, Shiva S, Gagrani R, Rao HSP, Anirudh VR, et al.
Parametric investigations on the influence of nano-second Nd
+ :YAG laser wavelength and fluence in synthesizing NiTi nano¬
particles using liquid assisted laser ablation technique. Appl Surf
Sci;366:104-ll.
Shirsat, S., Pawar, D.N., Jain, N., Pawar, J., Tale, V.S., & Henry, R.
Synthesis of copper oxide nanoparticles by chemical
precipitation method for the determination of antibacterial efficacy
against Streptococcus sp. and Staphylococcus sp. Asian Journal of
Pharmaceutical and Clinical Research, 135-138.
Taue, J., Grigorvici , R., Vancu , A.,1966. Optical properties and
Electronic structure of Amorphous Germanium . Phys. Status solid
B ,15, 627-637. DOI: 10.1002/pssb.19660156224.
Triloki., Rai, R., Singh, B.K., 2013. Absorbance and Transmittance
measurement of CsI thin films, Proceedings of the DAE Symp. on
Nucl. Phys. 58, 838-839.
Yang .G. 2O12.Laser ablation in liquids: principles and applications in
the preparation of nanomaterials. CRC Press, p. 1192.
Zeng, H., Cai, W., Li, Y., Hu, J. and Liu, P., 2005.
Composition/structural evolution and optical properties of ZnO/Zn
nanoparticles by laser ablation in liquid media. The Journal of
Physical Chemistry B, 109(39), pp.18260-18266.
Zeng, H., Xu, X., Bando, Y., Gautam, U.K., Zhai, T., Fang, X., Liu, B. and
Golberg, D., 2009. Template Deformation Tailored ZnO
Nanorod/Nanowire Arrays: Full Growth Control and Optimization of
Field Emission. Advanced Functional Materials,19(19), pp.3165-3172.
Zhang, Q., Zhang, K., Xu, D., Yang, G., Huang, H., Nie, F., Liu, C. and
Yang, S., 2014. CuO nanostructures: synthesis, characterization,
growth mechanisms, fundamental properties, and
applications. Progress in Materials Science, 60, pp.208-337.
Zoolfakar, A.S., Rani, R.A., Morfa, A.J., O'Mullane, A.P. and KalantarZadeh, K., 2014. Nanostructured copper oxide semiconductors: a
perspective on materials, synthesis methods and
applications, journal of materials chemistry c,2(27), pp.5247-5270.
Downloads
Published
Issue
Section
License
You are free to:
- Share — copy and redistribute the material in any medium or format for any purpose, even commercially.
- Adapt — remix, transform, and build upon the material for any purpose, even commercially.
- The licensor cannot revoke these freedoms as long as you follow the license terms.
Under the following terms:
- Attribution — You must give appropriate credit , provide a link to the license, and indicate if changes were made . You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
- No additional restrictions — You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.
Notices:
You do not have to comply with the license for elements of the material in the public domain or where your use is permitted by an applicable exception or limitation .
No warranties are given. The license may not give you all of the permissions necessary for your intended use. For example, other rights such as publicity, privacy, or moral rights may limit how you use the material.
