The effect of sterilization cycle on cyclic fatigue resistance of rotary files (in vitro study)
Keywords:
sterilization cycle; rotary files; fatigue resistanceAbstract
Files’ cutting efficiency, cyclic fatigue resistance, surface roughness, and accumulation of dentinal debris on them, among other characteristics, can all be affected by the repetitive autoclaving and sterilization. Cutting efficiency, also referred to as an instrument’s ability to extract dentine from a canal, is one of its qualities. The study’s objective is to ascertain how autoclave sterilization affects the cycle fatigue resistance (CFR) of two various rotary nickel-titanium (NiTi) systems. The Edge File and Fanta File rotary endodontic instrument groups were chosen. Each group (n = 42) was split into 3 subgroups (n = 14 each), Based on the number of autoclaving cycles (0, 1,2 cycles). The tools went through an autoclave without being used. The result appeared different significant between the two group and subgroup with the different cycle of sterilization that used with it with the length of fractures and time that recorded in each group.
Downloads
References
O. Peters, P. M. H. Dummer, and M. Hu, "Mechanical prepa¬
ration of root canals : shaping goals, techniques and
means," Endodontic Topics, vol. 10, pp. 30-76, 2005.
M. K. Iqbal, M. R. Kohli, and J. S. Kim, "A retrospective
clinical study of incidence of root canal instrument
separation in an endodontics graduate program: a
PennEndo database study," Journal of Endodontia, vol.
, no. 11, pp. 1048-1052, 2006.
C. Champa, V. Divya, A. Srirekha, R. Karale, A. Shetty, and
P. Sadashiva, "An analysis of cyclic fatigue resistance of
recip- rocating instruments in different canal
curvatures after immersion in sodium hypochlorite and
autoclaving: an i>in vitro study," Journal of
Conservative Dentistry, vol. 20, no. 3, pp. 194-198, 2017.
G. Zelada, P. Varela, B. Martin, J. G. Bahillo, F. Magan, and
S. Ahn, "The effect of rotational speed and the
curvature of root canals on the breakage of rotary
endodontic instruments," Journal of Endodontia, vol. 28,
no. 7, pp. 540-542, 2002.
U. K. Bulem, A. D. Kececi, and H. E. Guidas, "Experimental
evaluation of cyclic fatigue resistance of four different
nickel- titanium instruments after immersion in sodium
hypochlorite and/or sterilization," Journal of Applied
Oral Science, vol. 21, no. 6, pp. 505-510, 2013.
Y. Yahata, T. Yoneyama, Y. Hayashi, A. Ebihara, H. Doi, and
T. Hanawa, "Effect of heat treatment on
transformation temperatures and bending properties
of nickel-titanium endodontic instruments,"
International Endodontic Journal, vol. 42, no. 7, pp. 621-
, 2009.
D. Zhao, Y. Shen, B. Peng, and M. Haapasalo, "Effect of
auto- clave sterilization on the cyclic fatigue resistance
of thermally treated nickel-titanium instruments,"
International Endodon- tic Journal, vol. 49, no. 10, pp.
-995, 2016.
M. Dioguardi, D. Sovereto, G. Illuzzi et al., "Management of
instrument sterilization workflow in endodontics: a
systematic review and meta-analysis," International
Journal of Dentistry, vol. 2020, Article ID 5824369, 20
pages, 2020.
C. R. A. Valois, L. P. Silva, and R. B. Azevedo, "Multiple auto¬
clave cycles affect the surface of rotary nickel-titanium
files: an atomic force microscopy study," Journal of
Endodontia, vol. 34, no. 7, pp. 859-862, 2008.
M. Khabiri, M. Ebrahimi, and M. R. Saei, "The effect of
autoclave sterilization on resistance to cyclic fatigue of
Hero endodontic file #642 (6%) at two artificial
curvature," Journal of Dentistry, vol. 18, no. 4, pp. 277-
, 2017.
G. Plotino, A. Costanzo, N. M. Grande, R. Petrovic, L.
Testarelli, and G. Gambarini, "Experimental evaluation
on the influence of autoclave sterilization on the cyclic
fatigue of new nickel-titanium rotary instruments,"
Journal of Endodon- tia, vol. 38, no. 2, pp. 222-225, 2012.
Y. Gao, J. L. Gutmann, K. Wilkinson, R. Maxwell, andD.
Ammon, "Evaluation of the impact of raw materials on
the fatigue and mechanical properties of ProFile vortex
rotary instruments," Journal of Endodontia, vol. 38, no.
, pp. 398- 401,2012.
G. Plotino, N. M. Grande, E. Cotti, L. Testarelli, and
Gambarini, "Blue treatment enhances cyclic fatigue
resistance of vortex nickel-titanium rotary files,"
Journal of Endodontia, vol. 40, no. 9, pp. 1451-1453,
EdgeEndo, EdgeFile X7 Directions for Usetie, 2015, https://
edgeendo.com/wp-content/uploads/2015/Q8/DFUEdgeFile- x7.pdf.
A. Dosanjh, S. Paurazas, and M. Askar, "The effect of
temperature on cyclic fatigue of nickel-titanium rotary
endodontic instruments," Journal of Endodontia, vol. 43,
no. 5, pp. 823-826, 2017.
D. Ammon, V. Shotton, Y. Gao, and R. Maxwell, Endodontic
Instruments and Methods of Manufacturing Thereof,
, US Patent Application 8916009 B2.
Plotino G, Grande NM, Cordaro M, Testarelli L, Gambarini
G. A review of cyclic fatigue testing of nickel-titanium
rotary instruments. J Endod. 2009;35:1469-1476
Pedulla E, Franciosi G, Ounsi HF, Tricarico M, Rapisarda E,
Grandini S, et al. Cyclic fatigue resistance of
nickel titanium instruments after immersion in irrigant
solutions with or without surfactants. J Endod
;40:1245 9.
Bhagabati N, Yadav S, Talwar S. An in vitro cyclic fatigue
analysis of different endodontic nickel-titanium rotary
instruments. J Endodont 2012; 38, 515-518.
Hilfer PB, Bergeron BE, Mayerchak MJ, Roberts HW,
Jeansonne BG. Multiple autoclave cycle effects on cyclic
fatigue of nickel-titanium rotary files produced by new
manufacturing methods. J Endod. 2011;37:72-4.
[PubMed] [Google Scholar]
Plotino G, Costanzo A, Grande NM, Petrovic R, Testarelli L,
Gambarini G. Experimental evaluation on the influence
of autoclave sterilization on the cyclic fatigue of new
nickel-titanium rotary instruments. J Endod.
;38:222-5. [PubMed] [Google Scholar]
Sundaram KM, Ebenezar RA, Ghani MF, Martina L,
Narayanan A, Mony B. Comparative evaluation of the
effects of multiple autoclaving on cyclic fatigue
resistance of three different rotary Ni-Ti instruments:
An in vitro study. J Conserv Dent. 2013;16:323-6. [PMC
free article] [PubMed] [Google Scholar]
Zinelis S, Darabara M, Takase T, Ogane K, Papadimitriou
GD. The effect of thermal treatment on the resistance
of nickel-titanium rotary files in cyclic fatigue. Oral Surg
Oral Med Oral Pathol Oral Radiol Endod. 2007;103:843-
[PubMed] [Google Scholar]
Aminsobhani M, Khalatbari MS, Meraji N, Ghorbanzadeh A,
Sadri E. Evaluation of the fractured surface of five
endodontic rotary instruments: A metallurgical study.
Iran Endod J. 2016;11:286-92. [PMC free article]
[PubMed] [Google Scholar]
Van Pham K. Differential scanning calorimetric
investigations of three rotary nickel-titanium
instrument systems before and after simulated clinical
uses. BMC Oral Health. 2021;21:488. [PMC free article]
[PubMed] [Google Scholar]
Ujjwal K, Borkar AC, Shetty P, Borse N, Nighot N.
Comparative evaluation of cyclic fatigue fracture
resistance of newer nickel titanium rotary files in
simulated curved canals: In vitro study. Int J Recent Sci
Res. 2018;9:23404-7. [Google Scholar]
Mahajan S, Kumar N, Singh AK, Kadyan R, Wasnik DS,
Verma V. In-vitro cyclic fatigue fracture resistance
evaluation of newer Niti rotary files: A comparative
study. Ann Int Med Dent Res. 2018;4:47-50. [Google
Scholar]
Rubio J, Zarzosa JI, Pallares A. A comparative study of
cyclic fatigue of 10 different types of endodontic
instruments: An in vitro study. Acta Stomatol Croat.
;53:28-36. [PMC free article] [PubMed] [Google
Scholar]
Aminsobhani M, Meraji N, Sadri E. Comparison of cyclic
fatigue resistance of five nickel titanium rotary file
systems with different manufacturing techniques. J Dent (Tehran) 2015;12:636-46. [PMC free article]
[PubMed] [Google Scholar]
Adiguzel M, O" ztekin F. Comparison of the resistance to
cyclic fatigue of one curve, one shape, 2shape and
EdgeFile X3 files in simulated single and S-shaped
(double) curvatures. Int Dent Res. 2020;10:55-9.
[Google Scholar]
Ujjwal K, Borkar AC, Shetty P, Borse N, Nighot N.
Comparative evaluation of cyclic fatigue fracture
resistance of newer nickel titanium rotary files in
simulated curved canals: In vitro study. Int J Recent Sci
Res. 2018;9:23404-7. [Google Scholar]
Inan, U.; Aydin, C.; Uzun, O.; Topuz, O.; Alacam, T.
Evaluation of the Surface Characteristics of Used and
New ProTaper Instruments: An Atomic Force
Microscopy Study. J. Endod. 2007, 33, 1334-1337.
[CrossRef] [PubMed]
Praisarnti, C.; Chang, J.W.; Cheung, G.S. Electropolishing
Enhances the Resistance of Nickel-Titanium Rotary
Files to Corrosion- Fatigue Failure in Hypochlorite. J.
Endod. 2010, 36, 1354-1357. [CrossRef] [PubMed]
Azimi, S.; Delvari, P.; Hajarian, H.C.; Saghiri, M.A.;
Karamifar, K.; Lotfi, M. Cyclic fatigue resistance and
fractographic analysis of RaCe and ProTaper rotary
NiTi instruments. Iran. Endod. J. 2011, 6, 80-85.
[PubMed[
James, B.; Foulds, J.; Eiselstein, L. Failure analysis of NiTi wires used in medical applications. J. Fail. Anal. Prev. 2005, 5, 82-87] .CrossRef[
Chen, J.H.; Wang, G.Z.; Sun, W. Investigation on the fracture behavior of shape memory alloy NiTi. Met. Mater. Trans. A 2005, 36, 941-955. [CrossRef[
Downloads
Published
Issue
Section
License
You are free to:
- Share — copy and redistribute the material in any medium or format for any purpose, even commercially.
- Adapt — remix, transform, and build upon the material for any purpose, even commercially.
- The licensor cannot revoke these freedoms as long as you follow the license terms.
Under the following terms:
- Attribution — You must give appropriate credit , provide a link to the license, and indicate if changes were made . You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
- No additional restrictions — You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.
Notices:
You do not have to comply with the license for elements of the material in the public domain or where your use is permitted by an applicable exception or limitation .
No warranties are given. The license may not give you all of the permissions necessary for your intended use. For example, other rights such as publicity, privacy, or moral rights may limit how you use the material.
